一、涂裝流水線用途

　　1、 Application of painting assembly line

　　目前涂裝流水線的應用愈發普遍，范圍也不斷擴大。總體而言，其主要用途是對工件進行噴涂作業，廣泛適用于零部件、電器、器械、五金、機械、機電產品、車輛等金屬制品的表面處理，以及木制家具、塑料制品等的表面處理。

　　At present, the application of painting assembly lines is becoming increasingly common and the scope is constantly expanding. Overall, its main purpose is to spray paint on workpieces, widely used for surface treatment of metal products such as components, electrical appliances, instruments, hardware, machinery, electromechanical products, vehicles, as well as surface treatment of wooden furniture, plastic products, etc.

　　二、涂裝流水線組成

　　2、 Composition of painting assembly line

　　涂裝流水線的構成部分大致包括：前處理設備、噴粉系統、噴漆設備、粉末回收設備、加熱烘干固化通道、熱源系統、電控系統、懸掛輸送鏈等環節，可依據實際工況進行非標準定制。

　　The components of the painting assembly line generally include pre-treatment equipment, powder spraying system, spray painting equipment, powder recycling equipment, heating, drying and curing channel, heat source system, electrical control system, suspension conveyor chain and other links. Non standard customization can be carried out according to actual working conditions.

　　三、涂裝流水線工作流程

　　3、 Painting assembly line workflow

　　涂裝流水線的工作流程如下：進行涂裝作業時，需先對工件做前處理，通常包括除油、除銹、磷化、鈍化等步驟。工件經前處理后，表面的油污、銹跡、灰塵會被清除干凈，同時在光亮的表面形成一層均勻且粗糙的灰色磷化膜，這層膜既能防銹，又能增強塑粉或油漆的附著能力。之后便可進行預熱并噴涂底漆，接著經過烘烤再進行表面噴漆，最后完成高溫固化。

　　The workflow of the painting assembly line is as follows: When performing painting operations, the workpiece needs to be pre treated, usually including steps such as oil removal, rust removal, phosphating, passivation, etc. After pre-treatment, the oil stains, rust, and dust on the surface of the workpiece will be cleaned up, and a uniform and rough gray phosphating film will be formed on the bright surface. This film can prevent rust and enhance the adhesion of plastic powder or paint. Afterwards, preheating and primer spraying can be carried out, followed by baking and surface painting, and finally high-temperature curing can be completed.

　　四、涂裝流水線使用注意事項

　　4、 Precautions for using painting assembly line

　　使用涂裝流水線時，操作人員需依照操作規范進行操作，避免因使用不當對設備造成損害，同時要按時進行保養，這樣才能保障設備的工作效率，延長其使用年限。若需要更換配件，應選用原裝配套產品，以確保設備正常運行。

　　When using the painting assembly line, operators need to follow the operating specifications to avoid damage to the equipment caused by improper use. At the same time, maintenance should be carried out on time to ensure the efficiency of the equipment and extend its service life. If replacement parts are needed, original matching products should be selected to ensure the normal operation of the equipment.

　　本文由工業涂裝流水線友情奉獻.更多有關的知識請點擊:http://www.qzxcdz.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is dedicated to the automatic shot blasting machine and friendship For more information, please click: http://www.qzxcdz.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message

上一篇：了解自動式拋丸機：從實際應用看其優勢特點
下一篇：拋丸機常見幾種故障及處理方法解析