Welding smoke purifier, also known as welding smoke purifier, welding dust collector, and welding smoke purifier, is mainly used to collect and purify the smoke, smoke, dust, and smoke generated during welding. The Grass and Wood Green Welding Smoke and Dust Purifier series is an efficient and environmentally friendly dust removal equipment. We will combine years of engineering experience and use multi-stage purification devices according to your workshop conditions to purify welding smoke and exhaust gas. It can effectively remove welding smoke and exhaust gas, as well as degrade the smell of welding smoke tar and various toxic and harmful gases.

簡單來說，我們的焊煙凈化器系列，有2種不同的產品，適用于各類焊接場所：

Simply put, our welding fume purifier series has 2 different products suitable for various welding locations:

集中式焊煙凈化器，主要配套設備為濾筒式除塵器或濾筒除塵一體機，適用于中小規模的焊接車間。

Centralized welding fume purifier, mainly equipped with filter cartridge dust collector or integrated filter cartridge dust collector, suitable for small and medium-sized welding workshops.

大型集中式焊煙凈化器，主要配套設備為靜電式煙塵凈化器，適用于汽車焊接、汽車零部件、造船、機械加工廠等大型、大規模焊接車間。

Large centralized welding fume purifier, mainly equipped with electrostatic fume purifier, is suitable for large and large-scale welding workshops such as automotive welding, automotive parts, shipbuilding, and mechanical processing plants.

市場上比較常見的焊煙除塵器，多為濾筒式或布袋式，而在一些焊接工藝中，由于焊接的工件表面有潤滑油等成分，產生的焊煙中含有油煙，使用濾筒除塵器或布袋除塵器容易造成設備阻塞，耗材更換頻繁，維護成本高，這種情況下，可由我們技術考察后，選擇靜電式煙塵凈化器。具體請直接來電咨詢！

The commonly used welding fume collectors in the market are mostly filter cartridge or bag type. However, in some welding processes, due to the presence of lubricating oil and other components on the surface of the welded workpiece, the generated welding fume contains oil fume. The use of filter cartridge or bag type dust collectors can easily cause equipment blockage, frequent replacement of consumables, and high maintenance costs. In this case, we can choose an electrostatic dust purifier after technical investigation. Please call directly for specific inquiries!

需要特別補充說明的是，我們不僅可以提供焊煙除塵設備，還可以針對多工位焊接、大型焊接車間、大型構件焊接工序、焊接線、焊接培訓教室等工況，提供凈化系統和工程總包。

It should be noted that we can not only provide welding smoke and dust removal equipment, but also provide purification systems and engineering general contracting for multi station welding, large welding workshops, large component welding processes, welding lines, welding training classrooms, and other working conditions.

1. 集塵系統設計，即焊煙收集系統，是焊煙凈化系統的重要部分，是工程設計的重要環節。

1. The design of the dust collection system, also known as the welding fume collection system, is an important part of the welding fume purification system and an important link in engineering design.

針對常規焊接工位，可采用收集罩進行粉塵收集。

For conventional welding stations, dust collection covers can be used for dust collection.

但對于大型部件的焊接工序，如，大型鑄件在生產過程中需要由行車輔助，進行360°旋轉焊接，這樣，每個焊接工位產生的煙塵，都很難用常規集塵方案處理。在面對這種工況時，我們可以提供有效的解決方案，比較常用的焊煙收集方案是吹吸式和車間整體通風式。歡迎直接來電，我們會提供詳細的一對一焊煙收集方案。

However, for the welding process of large components, such as large castings, which require the assistance of a crane for 360 ° rotation welding during the production process, it is difficult to treat the smoke and dust generated by each welding station using conventional dust collection methods. When facing this working condition, we can provide effective solutions. The commonly used welding smoke collection methods are blow suction and overall ventilation in the workshop. Welcome to call directly, we will provide a detailed one-on-one welding smoke collection plan.

2. 吸塵管路設計

2. Dust suction pipeline design

吸塵管理設計，需要根據現場工況一對一設計，管道走向、通徑、長度需要根據系統操作工位的數量、所需排風的面積、所吸物料對象物理、化學性能、主機和系統所處環境等多種因素，進行綜合考量。

The design of vacuum management needs to be one-on-one based on the on-site working conditions. The pipeline direction, diameter, and length need to be comprehensively considered based on various factors such as the number of operating stations in the system, the required exhaust area, the physical and chemical properties of the material being sucked, the host and the environment in which the system is located.

3.除塵主機和風機選型。

3. Selection of dust removal host and fan.

除塵器主機可安裝在室外或車間、廠房的機房、陽臺、車庫、設備間內，根據工況具體要求來選定。我們有濾筒式焊煙凈化器和靜電式焊煙凈化器兩種產品系列，與其他廠家相比，可更深入的考量設備投資和運行費用。

The dust collector host can be installed outdoors or in workshops, factory rooms, balconies, garages, and equipment rooms, depending on the specific requirements of the working conditions. We have two product lines: filter cartridge welding smoke purifier and electrostatic welding smoke purifier. Compared with other manufacturers, we can consider equipment investment and operating costs more deeply.