汽車噴烤漆房是一種含有機械、電氣、過濾材料、密封件、傳動件和加熱設備等多種部件的特殊設備，因此，在日常使用汽車噴烤漆房的過程中，請務必注意汽車噴烤漆房維護及保養，主要可分為以下幾個方面：

The car spray paint room is a special equipment that contains various components such as mechanical, electrical, filtering materials, seals, transmission components, and heating equipment. Therefore, in the daily use of the car spray paint room, it is important to pay attention to the maintenance and upkeep of the car spray paint room, which can be mainly divided into the following aspects:

1.過濾系統的維護

1. Maintenance of the filtration system

過濾系統是汽車噴烤漆房的重要組成部分，一般汽車噴烤漆房的過濾系統由以下幾種材料組成：初效過濾棉，亞高效過濾棉，玻璃絲過濾氈，活性碳。

The filtration system is an important component of the automotive paint spraying and baking room. Generally, the filtration system of the automotive paint spraying and baking room consists of the following materials: primary filtration cotton, sub efficient filtration cotton, glass fiber filtration felt, and activated carbon.

(1)初效過濾棉主要用于原始空氣的初次過濾，其更換的周期一般為100小時左右，也可視具體情況而定；

(1) The primary filter cotton is mainly used for the initial filtration of raw air, and its replacement cycle is generally around 100 hours, which can also be determined according to specific circumstances;

(2)亞高效過濾棉用于空氣的二次過濾，其更換周期一般為400小時左右；

(2) The sub efficient filter cotton is used for secondary air filtration, and its replacement cycle is generally around 400 hours;

(3)玻璃絲過濾氈主要用于廢氣中有機物的收集，通常汽車噴烤漆房有兩次玻璃絲過濾，其更換周期一般為80-120小時。

(3) Glass fiber filter felt is mainly used for collecting organic substances in exhaust gas. Usually, the car paint spraying room has two glass fiber filters, and its replacement cycle is generally 80-120 hours.

(4)活性碳用于吸附漆霧中的油漆廢氣，請每隔7天檢查活性碳過濾網，若活性碳表面粘滿油漆影響排風時，應及時更換活性碳，確保排風順暢。

(4) Activated carbon is used to adsorb paint exhaust gas from paint mist. Please check the activated carbon filter screen every 7 days. If the surface of the activated carbon is covered with paint and affects ventilation, the activated carbon should be replaced in a timely manner to ensure smooth ventilation.

2.電氣元器件的維護

2. Maintenance of electrical components

控制系統是汽車噴烤漆房的“大腦”，它直接指揮汽車噴烤漆房房完成各項操作，因此，保證其控制元器件的性能穩定相當重要，在使用過程中，須定期檢測其元器件的性能，以保證其能準確無誤地執行各項指令，順利完成作業。

The control system is the "brain" of the car paint spraying and baking room, which directly commands the car paint spraying and baking room to complete various operations. Therefore, it is important to ensure the stable performance of its control components. During use, it is necessary to regularly check the performance of its components to ensure that it can accurately and accurately execute various instructions and complete the operation smoothly.

3.傳動件的維護

3. Maintenance of transmission components

汽車噴烤漆房的傳動件主要為電機與風機間的傳動，由于使用相對頻繁，烤漆房在工作一段時間后，電機與風機的傳動皮帶會有一定程度的松動和磨損，此時須視具體情況調節皮帶的張緊程度，必要時作出更換，以保證風機的運轉達到佳效果，此外，在風機兩側的軸承蓋上均有注油孔，應定期對風機上的軸承加注潤滑油，保證其運轉順暢。

The transmission components of the car paint spraying room are mainly the transmission between the motor and the fan. Due to relatively frequent use, the transmission belts of the motor and fan in the paint spraying room may become loose and worn to a certain extent after working for a period of time. At this time, the tension of the belts must be adjusted according to the specific situation, and if necessary, they should be replaced to ensure the optimal operation of the fan. In addition, there are oil injection holes on the bearing covers on both sides of the fan, The bearings on the fan should be regularly lubricated to ensure smooth operation.

4.其他日常維護

4. Other daily maintenance

為保證汽車噴烤漆房的使用性能，還應做到其他必要的日常維護，主要有：保證房內的衛生；檢查連接處螺栓的松緊情況，檢查房體周圍環境，確保汽車噴烤漆房在使用過程中沒有安全隱患。

To ensure the performance of the car spray paint room, other necessary daily maintenance should also be carried out, mainly including: ensuring the cleanliness of the room; Check the tightness of the bolts at the connection, check the surrounding environment of the room, and ensure that there are no safety hazards during the use of the car spray paint room.

上一篇：噴漆廢氣處理方法及使用指導！
下一篇：伸縮移動噴漆房非標定制設計要點